3D FDM printing is the first video course completely in Italian on filament 3D printing.
We created the course with one goal in mind: to make the video course
on 3D printing most comprehensive course in the Italian language.
It starts from A and goes to Z. This route is suitable for both novice and more experienced users.
In the course you will find 100+ lessons (for a total of 10+ hours).
Including complete course on Simplify 3D and Cura completely in Italian.
Once purchased, you will immediately enter the member area we have prepared for you and pou can study the course wherever and whenever you want, in fact you will always be able to find it in your member area with no time limit.
Learn how to print without imperfections, no more throwing away your time and money on wasted filament.Makers and digital creatives
3D printer novice
Simple enthusiasts who want better results
3D modelers who want to produce their own designs
Technical Clerks in the Company
Fablab owners or techniciansSave time and get to the maximum result right away by avoiding months of research and mistakes!
We’ve been there too, getting started with 3D printing may not be a walk in the park; there are many new things to learn, starting with the mechanical operation of the printer, going through the software and solving problems in order to get a perfect print.We have incorporated all the knowledge from years of study, mistakes, research and experimentation into this course.Through this course you will learn how to:
Choosing a printer
Understanding the operation of the printer
Know the software needed for printing
Knowing the materials
Knowing the logics to improve printing
Know the solutions to printing problems
Know the techniques for finishing prints
Learn everything you need to know.
In a few minutes, once you start the course. you will be able to see for yourself that every aspect of 3D printing is covered in this course. Once you finish this course, you will not need to look elsewhere for what you need. Finally, a complete package for learning 3D printing, all in Italian.The content of the course (completely in Italian):
100+ Lessons on everything you need to make perfect prints
What is 3D printing?
The Components of the Printer
Basic steps of printing
Getting Models to Print: 3D Modeling
Getting Models to Print: 3D Scanning
Get Templates to Print: Download Templates from the Internet
SIMPLIFY 3D COMPLETE COURSE
Introduction to slicing
Infill: Manage the infill of templates
Top & Bottom shell: top and bottom layers
Introduction to the Layer
Advanced Layer Settings
Set printing temperatures
Introduction to Brim & Raft
Set Brim & Raft
Introduction to Print Media
Set the media for printing
Orient for better support
Set the cooling fan
Width: Set the extrusion width
Set the Width
Retraction: Avoiding filament spillage
Coasting Wipe: Avoiding Blobs
Speed: Manage printing speed and time
Scripts: Editing G-Code with Scripts
Horizontal size compensation: Improve the size
Thin Wall: Managing Thin Walls
Multiple Processes: Setting Up Advanced Printouts
Sequential Printing: Printing multiple templates simultaneously
Ooozing Control: Advanced retraction management
FULL COURSE CARE
Basic Reccomended: Basic Recommended Settings
Basic Custom: Basic Customizable Settings
Advanced: Advanced settings
Experts: in-depth settings for experts
APPROACH: Improving Printing with Adaptive Layers
APPROACH: Finishing Top Layers with Ironing
SLICER – SLIC3R
3D PRINTING MATERIALS
Filaments to start printing
Filaments for special applications
Powder Filled Filaments
Test Rupture: Pla vs. Abs
Guide to Printing PLA
Guide to Printing PETG
Guide to Printing ABS
Guide to Printing FLEX
electroplating electroplating 3D printing
Cleaning the Press from the Media
Primer: For leveling surfaces
Sanding the surface
Paint the printed model
Smoothing the surface with Acetone Fumes
Level the surface with Epoxy Resin
PLACE THE 3D MODEL
Positioning the model to improve quality
Positioning the model to optimize costs
Subdivide the model to print complex patterns
What is the right size of the plate?
Professional or Low cost printers?
End-Filament Sensor: What it is and how it works
The Best Filament Printers of 2019
Setting the Z-Adjust
Calibrate Extrusion Width
Exact dimensions of the model: X Y Z
Calibration of E-Steps
PRACTICAL EXAMPLE: Calibrate Your Width in a Simple Way
SOLVE PRINTING PROBLEMS
Blobs on the edges of the model
Details that do not come
Adhesion between Model Layers
Layershift: Grooved model
Marks on the surface of the model
Wire webs on the model
Inhomogeneous top layers
Warping: Model deformations
Supported areas of poor quality
CASE STUDY: How to recover an interrupted printout.
SOME OF OUR PRINTS
GET RESULTS FAST BY FOLLOWING A FEW TIPS
Are you going to have a “buying group”?
Warning: this practice is NOT allowed, we constantly monitor account activity and in case of suspicious activity we reserve the right to block access to the course without prior notice. Downloading video lessons is also prohibited: when an account downloads video lessons, we are automatically notified. Again, we reserve the right to revoke access to the course.Frequently Asked Questions about the course
Once I have purchased the course how long can I watch the videos?
The course has no time limit! Once you purchase the course you can watch the videos forever and whenever you like
How many times can I watch the videos?
No viewing limit, once purchased the videos are yours to watch as many times as you need
If I have doubts about the lessons who can I ask?
If you have any questions you can use the Binarioprint group, where you can find Alessio and other experts, or email firstname.lastname@example.org
On what devices can I watch lectures?
Our Online Academy allows videos to be viewed from Pc, Table, Phone and SmartTV.