Rigid Resin -XYZPrinting - 2 x 500 ml - Nobel

    Rigid Resin -XYZPrinting - 2 x 500 ml - Nobel

    Tax included


    This resin is highly rigid and resists deformation, making it suitable for engineering prototypes with thin features.
    It is strictly prohibited to heat this product. Photopolymer resins can generate vapors, which can cause discomfort if subjected to high temperatures.
    Store the product in a well-ventilated space out of the reach of children.
    Avoid skin or eye contact with cured resin. In case of accidental contact, immediately rinse the affected area with clean water.
    Uncured resin in the tank may solidify by pouring it into a waste container and exposing it to sunlight before disposal. Do not pour the material directly into the sink.

    Remove the printed object from the print bed and wipe the uncured resin off the surface of the object with alcohol as soon as printing is finished.
    When the alcohol on the surface has evaporated, it is possible to post-dry the object in a UV drying chamber to effectively increase the robustness of the object.
    Undried resin left in the resin tank can be stored for the next print. To prevent the resin from degrading due to exposure to other light sources or air, it is advisable to filter the resin and store it in an opaque container. Before the next print, shake the resin well and pour it back into the resin tank.

    Refer to the recommended settings of the XYZprinting UV curing device.
    Power level (POWER): 3
    Curing time (TIME): 15
    2 Items

    Data sheet

    0,5 Kg x 2 bottles

    Specific References

    New Account Register

    Already have an account?
    Log in instead Or Reset password