Magenta resin -XYZPrinting - 2 x 500 ml - Nobel

    Magenta resin -XYZPrinting - 2 x 500 ml - Nobel

    139,00 
    Adóval együtt
    In stock: 3 pz.


    If you want information contact the 3dcut specialists !!

    Mennyiség
    Utolsó tételek a raktáron

    resin xyzprinting nobel 1.0a magenta

    Compatible with Nobel series, however Gray color is not compatible with Nobel 1.0 A.
    The standard resin offers a wide range of applications and moderate stiffness making it suitable for both generic design creations and engineering design prototypes; it is available in multiple color options, including translucent and opaque varieties, and is capable of meeting the requirements of various applications. The surface of the printed product can be spray painted with coloring materials to further expand the application possibilities.
    Important Notice
    It is strictly prohibited to heat this product. Photopolymer resins can generate vapors, which can cause discomfort if subjected to high temperatures.
    Store the product in a well-ventilated space out of the reach of children.
    Avoid skin or eye contact with cured resin. In case of accidental contact, immediately rinse the affected area with clean water.
    Uncured resin in the tank may solidify by pouring it into a waste container and exposing it to sunlight before disposal. Do not pour the material directly into the sink.
    Usage reminder
    Remove the printed object from the print bed and wipe the uncured resin off the surface of the object with alcohol as soon as printing is finished.
    When the alcohol on the surface has evaporated, it is possible to post-dry the object in a UV drying chamber to effectively increase the strength of the object.
    Undried resin left in the resin tank can be stored for the next print. To prevent the resin from degrading due to exposure to other light sources or air, it is advisable to filter the resin and store it in an opaque container. Before the next print, shake the resin well and pour it back into the resin tank.
    Please refer to the recommended settings of the XYZprinting UV curing device.
    Power level (POWER): 3

    Curing time (TIME): 10

    3 Elemek

    Adatlap

    Súly
    0,5 Kg x 2 bottles

    Megadott referenciák

    Ez még talán érdekelhet

    New Account Register

    Already have an account?
    Log in instead Vagy Reset password