Zortrax Apoller

    Zortrax Apoller

    6 200,00 
    з податком
    In stock: 0 pz.

    If you want information contact the 3dcut specialists !!

    Zortrax Apoller

    Automatic post-processing with Zortrax Apoller - A smart vaporizer that smoothes your 3D prints

    Zortrax Apoller is an intelligent steam sanding device that automatically smoothes the visible layers of FFF / FDM-3D prints. This smart vaporizer works with both acetone and MEK. The smoothing process is fully automated and controlled by intelligent proprietary algorithms. These control and regulate the temperature, pressure and concentration of solvent vapors in the Apoller precisely at all times.

    First, the model must be placed in the smoothing chamber. Then the chamber is heated sufficiently to evaporate the solvent inside the Apollo. The vapors are then swirled up to uniformly cover the component.

    The solvent vapors condense on the surfaces of the object and leave a glossy or dull surface, depending on the filament used. After completing the sanding process, Zortrax Apoller dries your 3D prints. Then they are ready to leave the room.

    The entire weekly production of 4 typical FFF / FDM 3D printers can be automatically smoothed in one day. The safety systems are designed to meet the strict requirements of the ATEX Directive 2014/34 / EC relating to the control of equipment intended for use in potentially explosive atmospheres.

    The main features of Zortrax Apoller:
    Construction chamber 300x250x250 mm with evaporator
    Zortrax SVS technology
    MEK and acetone compatibility
    Intuitive tactile surface
    Wifi and Ethernet connectivity
    Use your Apoller with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro and Z-HIPS
    Compatibility with external materials such as ABS, ASA and HIPS
    Advanced steam cycle system
    ATEX compliant safety systems

    Compatible solvents:
    Butanone (MEK)

    Zortrax compatible filaments:
    Z-ULTRAT Plus
    Z-ASA Pro

    Speed and ease of use for post-processing of 3D prints

    The models must be placed in a sealed double smoothing chamber of 300x250x250 mm. The settings are then selected via an intuitive touchscreen. Once this is done, the Zortrax apoller takes only 3 hours to smoothly smooth all models in its chamber.

    Zortrax Apoller's SVS technology is based on advanced proprietary algorithms that measure and control the temperature, pressure and concentration of solvent vapors in a hermetic, double-sealed smoothing chamber. The pressure in the chamber is always kept below the ambient pressure. This prevents harmful vapors from escaping and harming health.

    The fumes inside the smoothing chamber are circulated upwards to evenly coat your models. The uniform distribution of the mist ensures that all surfaces are uniformly wetted and chemically smooth. Once the smoothing process is complete, Zortrax Apoller lowers the temperature inside the installation space, condenses the excess solvent and is returned to the tank. A 300ml bottle of acetone or MEK can be reused for different smoothers. This saves costs and conserves resources to the maximum.

    Zortrax Apoller has reliable security systems with multiple levels of redundancy. Meets the high requirements of the ATEX 2014/34 / EC directive for the control of devices for potentially explosive atmospheres. Use Zortrax Apoller easily and safely in your laboratory.

    Zortrax Apoller works with acetone and butanone (MEK). These are the most used and cheapest solvents. This innovative device can smooth your 3D printed models with Z-ABS, Z-ULTRAT, Z-ULTRAT Plus, Z-ASA Pro and Z-HIPS 3D. Also rework parts made from third-party materials with similar properties.


    Workable Area
    300x250x250 mm
    30 Kg
    1500 W

    Спеціальні посилання

    Можливо вам також сподобається

    New Account Register

    Already have an account?
    Log in instead Або Reset password