Gray Resin - Wanhao UV Resin - 500 ml
In stock: 12 pz.
If you want information contact the 3dcut specialists !!
Wanhao UV-DLP resin is particularly suitable for processing on LED DLP and UV 3D printers. Printers cure (solidify resin by chemical reaction) liquid resin by UV light with a wavelength of 405 nanometers .
The resin is owned by Wanhao and consequently calibrated to optimize printing using them, but this does not exclude the use with other resin printers
For best 3D printing results, clean your items in an isopropyl alcohol bath after the finished 3D printing. Leave the parts in the isopropyl alcohol for about 10 minutes.
Wavelength 405 NM
Time to solidify 8-16s
Viscosity (25 degrees) 120-140 mPa.s
Density (25 degrees) 1.12g / cm3
500 ml format
Depth of Polymerization 0.1 mm
Storage temperature 8-28 °
Expiry date 12 Months
Hardness (horizontal) 79.2
Flexural strength (horizontal direction) 8.43 Mpa
Tensile strength (horizontal direction) 21.4 Mpa
Hardness (vertical direction) 73.5
Flexural strength (vertical direction) 5.57 Mpa
Tensile strength (vertical direction) 15.2 Mpa
Solid content 65.0% -66.0% (test temperature: 105 ° C)
Molecular weight 1000-30.000