BASF Ultrafuse PA6 GF30

A unique compounded

Ultrafuse GF30-PA6 filament for 3D printing is a reinforced material designed to be compatible with any standard 3D printer to fabricate fused filaments.

Ultrafuse PA6 GF30 is a unique compound specifically developed for FFF printing. Thanks to the 30% fiberglass content, parts tend to warp less. In addition, the excellent adhesion between layers and its compatibility with the Ultrafuse BVOH water-soluble substrate make this material the perfect solution for developing industrial applications on an FFF printer.

With its high wear and chemical resistance, high stiffness and strength, Ultrafuse PA6 GF30 is perfect for a wide variety of applications in the automotive, electronics or transportation industries.

Ultrafuse PA6 GF30 is designed for functional prototyping and demanding applications such as industrial tooling, transportation, electronics, small appliances, sports, and leisure.

Benefits at a glance

Very high rigidity and strength
Good chemical resistance
Resistance to UV exposure
High wear resistance
Excellent layer adhesion
Works with Ultrafuse® BVOH

Examples of Applications

Automotive / Transportation
Industrial tools
Functional prototyping

Material Properties

Properties	Value
Tensile Strength (MPa)	78.3 / 46.4 (XY), 14.9 / 12.2 (ZX)
Modulus of Flexure (MPa)	4694 / 2861 (XY), 8103 / 4300 (XZ), 2371 / 1070 (ZX)
Elongation at break (%)	2.2 / 3.2 (XY), 0.8 / 1.9 (ZX)
Impact resistance Unengraved Charpy (kJ/m2)	38.9 / 41.8 (XY), 45.5 / 48.8 (XZ), 2.2 / 3.1 (ZX)
Impact resistance Unetched Izod (kJ/m2)	38.4 / 36.9 (XY), 38.7 / 41.4 (XZ), 2.6 / 3.8 (ZX)
HDT at 0.45 MPa (°C)	110 / 114