Magigoo Pro PA Adhesive 50 ml: User Guide and Warnings
Magigoo Pro PA Adhesive 50 ml is an adhesive designed for professional use, specifically formulated to work with Polyamide (nylon) filaments. It is particularly useful for ensuring good adhesion during 3D printing and for making it easier to remove prints once they have cooled. This adhesive is ideal for working with various types of PA, such as PA12, PA66, and PA6, as well as their glass or carbon fiber reinforced variants.
Product features
- Improved adhesion: Ensures good adhesion of nylon filaments to print surfaces.
- Easy removal: Prints can be easily removed once cooled.
- Easy-to-clean glue residues: Adhesive residues can be easily removed from the printing surface.
Instructions for use
- Preparation:
- Make sure the print surface is clean and free of dust or residue.
- Shake the bottle vigorously before use.
- Adhesive Application:
- Apply the adhesive to the desired area by pressing the tip on the print bed to activate the internal valve and disperse the adhesive evenly.
- Spread the adhesive in a thin, even layer over the entire print area.
- Printing:
- Print according to the filament or printer manufacturer’s recommendations.
- Check the adhesion of the first layer to ensure that it is uniform and free of deformation.
- Removing the printout:
- Allow the print to cool down before removing. The part should come off easily once cooled.
- If necessary, use a scraper to make it easier to remove the printout.
- Cleaning:
- Wipe the print surface with a damp cloth to remove adhesive residue. Once the adhesive layer is wet, a white layer is formed that can be easily wiped off with a sponge.
Benefits of using Magigoo Pro PA Adhesive 50ml
- Optimized for nylon: Designed specifically for Polyamide filaments, providing better adhesion than generic adhesives.
- Versatile: Works with different types of PA, including glass or carbon fiber reinforced variants.
- Ease of Use: Quick and easy application and removal, improving the efficiency of the printing process.
Warnings
- Exclusive use for PA filaments: Use of this product with filaments other than PA filaments may cause over-adhesion and damage the print surface.
- Safety Warnings:
- P264: Wash hands thoroughly after use.
- P280: Wear gloves/protective clothing/Eye/face protection.
- P305+P351+P338: IF IN CONTACT WITH EYES: Rinse thoroughly for several minutes. Remove any contact lenses if it is easy to do so. Continue rinsing.
- P337+P313: If eye irritation persists, seek medical attention.
- H319 Hazard Statements: Causes severe eye irritation.
Magigoo Pro PA Adhesive 50 ml represents a specialized solution for FDM 3D printing with nylon filaments, offering better adhesion and facilitating the removal of prints, essential for obtaining high-quality results with advanced technical materials.
