Zortrax M300 Dual FDM 3D Printer

4.400,00  + IVA

Zortrax M300 Dual FDM 3D Printer

Are you a professional and have high demands on the quality and performance of your 3D printer? Then the Zortrax M300 Dual is the FFF 3D printer for you. 3D printing with two extruders and nozzles with water-soluble support material and the filament of your choice. The Zortrax M300 Dual also offers many other smart features.

  • 3D printing undercuts and complex protrusions with support material using two extruders
  • Large building volume of 265x265x300 mm for large components
  • Wi-Fi, USB and Ethernet for superior connectivity
  • Power failure protection, color display, touch screen
  • Mepa Product Code – 3DCUT013


Zortrax M300 Dual FDM 3D Printer

LPD Plus technology designed for BIG industrial-level results

With dual extrusion technology, the model and water-soluble support structures are built simultaneously. Moving and intricate designs can be printed, as all supporting structures will dissolve in water.

Print even 3 times faster!

Zortrax M300 Dual FDM 3D Printer can speed up printing with the Speed Mode feature available in a free firmware update. The printing speed can be adjusted during the current printing process without having to press the pause button.

Zortrax Speed mode is an excellent option in batch production, rapid prototyping, and projects where models undergo additional post-processing.

Learn more

A steel positioning jig. Used on the production line of 3D printed hybrid drives with BASF Ultrafuse® 316L.

A 3D steel print after the debinding and sintering process.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Print as you like

Various types of printing platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows you to choose the set-up perfectly suited to the activity at hand.

Minimizing human error

Zortrax M300 Dual FDM 3D Printer is an efficient time-saving device equipped with advanced sensors to supervise the 3D printing process from start to finish with almost no supervision.

No more unsuccessful printing

The printer can reduce the time lost due to power outages and various types of mechanical failures. In such cases, printing is automatically paused and can be resumed immediately after the problem has been solved.


3DCUT - Zortrax M300 Dual FDM 3D Printer

Industrial quality results from the
desktop 3D printer

Large working space

Its large working space of 265x265x300 mm is enough to print large models at once.

Double extrusion system

LPD Plus technology works with two nozzles and a dual hot-end.

Blackout response system

Zortrax M300 Dual FDM 3D Printer can detect a power failure and resume printing from the same point when power is restored.

Capacitive sensor

CDS enables automatic printer calibration regardless of the type of printing platform installed.

Advanced filament control

Zortrax M300 Dual FDM 3D Printer automatically pauses printing when filament jams, runs out, or when the nozzle becomes clogged.

Support external materials

Third-party filaments available on the spools are fully supported in both single and dual extrusion modes.

Printing metal parts on M300 Dual

Zortrax M300 Dual FDM 3D Printer supports many types of filaments. Its design allows a variety of basic, specialized and reinforced materials to be used. The 3D printer also has the ability to print with metal powder filaments produced by BASF Forward AM.

Large-format models made with
a desktop-sized 3D printer

3DCUT - Zortrax M300 Dual FDM 3D Printer

Step 1 Drawing

You can design models in all types of CAD software that support exporting .stl and .obj files or simply download them from the many online libraries.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Step 2 Print

Z-SUITE can send an already pre-processed template to one or more of your printers via Wi-Fi or Ethernet network.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Step 3 Remove the supports

Water-soluble support filaments can be easily removed by rinsing. A dedicated Z-SUPPORT Premium dissolves quickly and leaves no residue on the model.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Step 4 Forward

Once the supports are removed, the model can function as a functional prototype or part for end use in various fields.

Manage your 3D printing farm in Zortrax inCloud

Zortrax inCloud is a cloud-based platform for managing and optimizing 3D printing farms. It allows you to efficiently manage 3D printing on all connected devices from your computer or smartphone.


Register your 3D printers in the Zortrax ID system and connect them to large production clusters.


Assign connected devices to the appropriate tasks and manage the production workflow.


Monitor the 3D printing process using the cameras installed inside each printer.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Dedicated Z-SUITE software

Z-SUITE is a dedicated slicing application that helps creators in the process of preparing models for 3D printing with Zortrax printers. It offers a variety of features that enhance the experience of using the Zortrax M300 Dual FDM 3D Printer.

3D printing without rafts

Z-SUITE supports 3D printing without a raft. A glass construction plate is recommended for this option.

Rotation optimization tool

The position of templates on the printing platform can be optimized to reduce the number of support structures or printing time.


Templates can be easily replicated to fit multiple parts of the same project on the printing platform.

Detection of thin walls

Walls too thin to print properly are highlighted in red. This avoids unsuccessful printing.

Improved support structures for metal filaments

Z-SUITE automatically divides support structures into smaller areas, helping users to post-process final metal 3D prints.

Automatic resizing of metal models

Z-SUITE automatically scales models intended for printing with metal filaments to compensate for material shrinkage.

3DCUT - Zortrax M300 Dual FDM 3D Printer

Specifications for Zortrax M300 Dual FDM 3D Printer


Volume of construction
265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in.)
Nozzle diameter
0.4 mm (0.016 in.) – standard, 0.6 mm (0.024 in.)
Dual, print with pattern and supporting material
Extruder cooling system
Two fans cooling the extruder; radial fan cooling the press
Heated; Various platforms (e.g., perforated or glass) are applicable.
Material limit switch
2 x Mechanical
Wi-Fi, Ethernet, USB
Operating system
Quad Core
Touch screen
4″ IPS 800×480


AC input
110 V ~ 5.9 A 50/60 Hz ; 240 V ~ 2.5 A 50/60 Hz
Maximum energy consumption
400 W


Software package
Supported file types
.stl, .obj, .dxf, .3mf, .ply
Supported operating systems
Mac OS Catalina and later versions / Windows 10 and later versions

Package Contents.

3D Printer, Side Lids, Z-SUITE, Starter Kit, Z-PETG, Z-SUPPORT Premium, 1x Perforated Platform, 1x Glass Platform, 2x Reel Holder, Material Box, USB Stick


LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Soluble Support Structures
Level resolution
150-200 microns (for 0.4 mm nozzle)
Minimum wall thickness
450 microns (for 0.4 mm nozzle)
Platform leveling
Automatic or manual measurement of platform point height


Dedicated for single extrusion
Z-ABS, Z-ASA Pro, Z-ESD, Z-FLEX, Z-GLASS, Z-HIPS, Z-NYLON, Z-PETG, Z-PLA, Z-PLA Pro, Z-ULTRAT, BASF Ultrafuse® PAHT CF15, BASF Ultrafuse® PP GF30, BASF Ultrafuse PET CF15, 3DXTECH CarbonX PETG+CF, Kimya PETG Carbon, Nanovia PC-ABS V0, Nanovia PETG CF
Dedicated to double extrusion
Z-ABS, Z-ASA Pro, Z-ESD, Z-FLEX, Z-NYLON, Z-GLASS, Z-PETG, Z-PLA, Z-PLA Pro, Z-SUPPORT ATP, Z-SUPPORT Premium, Z-ULTRAT, BASF Ultrafuse 17-4 PH, BASF Ultrafuse 316L, BASF Ultrafuse ABS, BASF Ultrafuse BVOH, BASF Ultrafuse PAHT CF15, BASF Ultrafuse support layer, Nanovia PC-ABS V0
External filaments
Mechanically removed – printed with the same material as the model / Soluble – printed with a different material from the model
Filament container
Filament diameter
1.75 mm (0.069 in.)


Maximum printing temperature (extruder)
310 °C (590 °F)
Maximum platform temperature
105 °C (221 °F)
Ambient operating temperature
20-30 °C (68-86 °F)
Storage temperature
0-35 °C (32-95 °F)

Zortrax M300 Dual FDM 3D Printer Key Features

  • Working area 265 x 265 x 300 mm
  • Wi-Fi, USB and Ethernet connectivity
  • Blackout response system
  • Calibrate a printing platform with a capacitive displacement sensor
  • Compatible with glass or perforated printing platforms
  • Supports single and dual extrusion modes
  • Zortrax Speed Mode function included
  • Compatible with materials from leading global brands (BASF, Kimya, Nanovia, 3DXtech)
  • Compatible with metal powder filaments – BASF Ultrafuse 316L and BASF Ultrafuse®® 17-4 PH
  • Produced in the EU
  • Worldwide warranty
  • Z-SUITE software completely free of charge

Specifiche Tecniche

Weight25 kg
Dimensions50 × 50 × 50 cm

Area di Lavoro

Velocità di Stampa

Precisione di Stampa

Diametro Filamento

Diametro Ugello

Doppio Estrusore

Temperatura Estrusore

Temperatura Piano


Formato disegno supportato



You may also like…